Waste gas treatment equipment is a large set of waste gas treatment equipment.I must pay attention to maintenance and maintenance during use.Only good operation and maintenance can maximize the service life and efficiency of the equipment.The following is the site should pay attention to the following points, hope to help users and friends to use and maintain the equipment.

1.Activated carbon replacement cycle of waste gas treatment equipment.Normally, organic waste gas treatment equipment will use activated carbon.Due to the need for regular regeneration of activated carbon or replacement time, so in normal circumstances, we have to calculate according to the working hours of the factory.The working time is eight hours, the desorption processing time of activated carbon should also be about three months, this is the general processing cycle, we can also calculate the desorption time according to the actual amount of activated carbon in detail, and activated carbon using two kinds of a year, will lose the regeneration effect;So we need to update and replace.

2.Activated carbon replacement method.In order to make it more convenient for us to replace the activated carbon in the process of operation, the activated carbon is generally used in the upward type, and the discharge outlet is used in the downward type.

3.Solvent recovery.The solvent of the waste gas treatment equipment is insoluble in water and is easily recovered with the water in the water.The recovered solvent can be mixed with water and added to coal, which is then fed to a boiler for combustion.

The routine maintenance of exhaust gas treatment equipment is to check that fans and pumps are working properly, filters and nozzles are open or blocked, liquid levels are normal, floats are malfunctioning, and other routine procedures.Whether the concentration of absorption and neutralization solution is within the prescribed range is also present.If the above problems are found, they should be dealt with immediately. Do not force the operation, otherwise the operation quality of the equipment will be affected or the equipment will be worn.

5.n the production process, errors in the auxiliary work of the waste gas treatment equipment usually affect the normal operation of the production.For example, analysis errors can lead to changes in feed volume and material composition: incorrect instructions of exhaust gas treatment equipment can deceive operators, resulting in actual operating conditions that greatly deviate from the requirements specified in the process.Electrical and equipment failures may also lead to abnormal production.